Step 01
Survey
We record glass type and thickness, existing coatings, frame depth, orientation, shading, access and interior finish. Photographs and meter readings go into the file. Typically 45–90 minutes, free, no obligation.
Installation
Surveyed, specified and fitted by the same crew
No subcontractors, no call-centre quoting, no “installation team will contact you”. The person who measures your glass is the person who signs off the finished work.
The process
From first call to signed-off glass
Most projects follow the same four stages. Commercial work adds a specification and access-planning step, but the sequence does not change.
Step 02
Specification & samples
Two or three candidate grades go onto your own glass, in your own light. You get the published performance figures for each, plus the fixed price and a start date in writing.
Step 03
Installation
Furniture moved and protected, floors dust-sheeted, glass cleaned and film cut to the pane. Edges are trimmed to a consistent gap, sealed where specified, and every pane is inspected against reflected light.
Step 04
Handover
Walk-round with you, curing and cleaning instructions, spare film for edge repairs, and the manufacturer warranty registered in your name. Invoicing after sign-off, not before.
Capabilities
Beyond heat and impact
The same crews and the same glass-preparation standards, applied to the rest of the film catalogue.
Solar control
Heat, glare and UV rejection on single glazing, sealed units and curtain wall.
Safety & security
Anti-shatter film, anchor systems and blast mitigation for vulnerable glazing.
Frost & privacy
Sandblast-effect and gradient frost for partitions, doors and consulting rooms.
Decorative & branded
Cut-vinyl graphics, manifestation dots and logo bands on glass.
Anti-graffiti
Sacrificial and permanent protective layers for street-facing glass.
Post-construction clean-up
Film removal, adhesive strip and re-film on failed or damaged installations.
Site readiness
What we need from the building
Film work is clean but it is still trade work. A few preparations keep the day short and the finish sharp.
- Access to the interior face of every pane — furniture moved 1 m clear
- Power socket within reach of each elevation
- Room temperature above 10 °C during installation and for 24 hours after
- Blinds and curtains removed or raised for the day
- For commercial work: lift or roof access and a permit-to-work contact
Coverage & response
How far we travel, how fast we answer
60-mile radius
Based in Springfield, covering Springfield, Riverton, Oak Hill, Cedar Park, Lakeside.
Survey within 5 days
Usually sooner. Emergency glass-safety assessments can be booked same week.
Fixed pricing
Priced from measured square footage and access — not an estimate that grows.
Warranty in your name
10-year residential, 5-year commercial, manufacturer-backed and registered at handover.
Aftercare
What happens if something is not right
Film failures are almost always one of three things: contamination under the film, a lifted edge, or a pane that should never have been filmed. All three are visible within days, and all three are our problem to fix.
Report it with a photograph and we book a return visit. Edge lifts are trimmed or re-filmed; contamination on our install is replaced at no cost; a mis-specified pane is removed and refunded.
Book a survey
Tell us the building, the glass and the problem. We will come and measure it, then quote a fixed price.